Path Lights Team
Path Lights on metal bars
- Keep groups of lights connected to each other
- Disconnect the connectors from the control boxes
- If any lights are coming off the metal bars, use a 5/32" drillbit to drill a new pilot hole and a self tapping screw to reattach them
- Bring all path lights on the bars outside the northwest swing gate to be taken to the trailer by the street
Path Lights on Ground Arch boards
- Keep lights on boards, if they are falling off, reattach them
- Disconnect the cords between each arch board but keep lights inside the PEX pipe and pushed into the 2x4s
Ground Arches
- Bring ground arches to the Building A Backstage Storage Area (you may be able to bring them outside the north rolling gate and get help from those with trucks to help move them to the back.)
- Remove 2x4 boards from arches (but keep the path lights and Pex pipe attached)
- See if they can be stored on a top shelf
Interactive Matrix
Cables in Conduits around the yard
- For cables and cords running through conduits, attach pull cord before you pull the extension cords back and leave it in the conduit after getting the extension cords so we have a pull cord the next time we want to use the conduit.
- Remove all cables from the conduits around the yard, Stabby’s team may help if they finish their tasks
- Bring cables to the Ramada to be stored
- When done, help clean up the yard or check in with Tim
Notes
- Tim should be available on radio channel 13
- When finished check in with Tim