ChromaTree Team — Christmas Light Teardown

Applies To

• Six 12.5’ ChromaTrees made from seed pixel strings
• Two 12.5’ ChromaTrees near Building B rear entrance

Team Goal

Safely remove, bundle, and store ChromaTree pixel strings so they remain untangled, and ready for fast installation next year.

Teardown Instructions

1. Yard ChromaTrees

1. Cut the zipties holding the seed pixel strings to the bottom ring
2. Keep lights attached to the top metal plate
3. Crank the stand down and detach the metal plate from the crank stand
4. With the lights still attched to the top metal plate, lay all strings parallel to each other on the ground aligning strings together to create one long bundle
5. Secure the bundle using ball bungees every 3–4 feet
   • Get ball bungees from the Ramada
   • Bungees should be snug, not tight
   • Do not kink the wire
6. Place the bundled seed pixel strings as one unit into totes labeled “ChromaTrees”

2. Building B Rear Entrance ChromaTrees

1. Cut the zipties holding the pixel strings to the bottom ring
2. Crank the stand down and detach the metal plate from the crank stand
3. Cut the zipties holding the pixel strings to the top metal plate
4. Take the stars off the stands
5. Flatten three-star sections
6. Place lights into totes labeled “ChromaTrees”

3. Storage

• Set totes and stars at the north rolling gate for transport to back storage
• Move large metal base rings and crank stands outside the northwest swing gate to be taken to the trailer by the street

Notes

• Tim should be available on radio channel 13.
• When finished check in with Tim.